【

承插管帽,管箍

】 产品详细参数 浏览 次
 
承插管帽   承插管箍
Socket Cap   Socket Coupling
 
承插焊管帽又名:高压管帽,锻钢管帽,公称通径:1/4"-5" ,DN20-DN200,适用介质:水,蒸汽,石油等材料:321,304,304L,316,316L,15CrMo,12Cr1MoV连接形式:对焊连接.

公称通径
Nominal
Diameter

 承插孔
深度
Depth of Socket		 承插孔
直径
Dimension of Socket		 壁厚
Wall Thickness		 管帽顶厚
End Wall Thickness		 中间长度
The length of midst		 中心至承插孔底
Center to Bottom of Socket
Cmin Kmin 双承口
管箍
Coupling		 单承口
管箍
Half-
Coupling		 45°斜三通
Lateral
A H
DN NPS

Jmin

d1

 3000
LB		 6000
LB		 9000
LB		 3000
LB		 6000
LB		 3000
LB		 E F 3000
LB		 6000
LB		 3000
LB		 6000
LB
Sch80 Sch160 XXS Sch80 Sch160 XXS Sch80 Sch160 Sch80 Sch160
6 1/8 10 10.7 3.2 3.5 - 5.0 6.5 - 6 16 - - - -
8 1/4 10 14.1 3.3 4.0 - 5.0 6.5 - 6 16 32 - 8 -
10 3/8 10 17.5 3.5 4.4 - 5.0 6.5 - 6 17 37 - 8 -
15 1/2 10 21.8 4.1 5.2 8.2 6.5 8.0 11.0 10 22 41 51 11 13
20 3/4 13 27.4 4.3 6.1 8.6 6.5 8.0 12.5 10 24 51 60 13 14
25 1 13 34.2 5.0 7.0 10.0 9.5 11.0 14.0 13 29 60 71 14 18
32 1.1/4 13 42.9 5.3 7.0 10.6 9.5 11.0 14.0 13 30 71 81 18 21
40 1.1/2 13 48.3 5.6 7.8 11.2 11.0 12.5 16.0 13 32 81 98 21 25
50 2 13 61.1 6.1 9.5 12.2 12.5 16.0 19.0 19 41 98 120 25 29
65 2.1/2 16 76.9(73.8) 7.7 12.5 - 16.0 19.0 - 19 43 - - - -
80 3 16 89.8 8.3 13.8 - 19.0 22.0 - 19 45 - - - -
100 4 19 115.5 9.4 - - 22.0 28.5 - 19 48 - - - -

备注：
承插管件壁厚外围平均值不低于所列值，最小值仅限于局部区域。
Note:
Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.

更多产品：变径承插弯头、承插管帽、承插弯头、Y型三通

相关新闻